Home  |  About ANYI   |   Products   |   Service + Support   |   Testimonials   |   Expertise   |   Contact   |     
Standard Reference
     Artifacts
Precision Step Gauges
Swivel Support
Module masters
Gauge blocks
Slide Calipers
Digital Calipers
Dial Calipers
Vernier calipers
Digital Scale Units
Depth Gauges
Digital Depth Gauges
Dial Depth Gauges
Vernier Depth Gauges
Height Gauges
Digital Height Gauges
Dial Height Gauges
Vernier Height Gauges
Micrometers
Micrometer Heads
Outside Micrometers
Inside Micrometers
Depth Micrometers
Indicators
Thickness gauges
Indicators
Special Calipers
Special Designs
Accessories
Clinometers
Stands
Data Interfaces
Surface Plates
Others
You are here: Home >> Expertise

Expertise

How does the Electronic Module Work ?

Digital calipers contain Grid-Capacitance Linear Synchronous Sensors which are comprised of a set of grid-capacitances and signal processing circuit.The set of grid-capacitances consist of stator grid-capacitance and sliding grid-capacitance. A pattern of grids is etched directly on the top copper layer of a standard glass-epoxy laminate of the printed circuit board stator. In the slider another printed circuit board contains 48 etched separate grids which are called emitters. The combination of these printed circuit boards forms two variable Capacitors. As the slider moves the capacitance changes in a linear fashion and in a repeating pattern. The two capacitances are out of phase. The signal processing circuit built into the slider counts the grids as the slider moves and does a linear interpolation based on the magnitudes of the capacitors to find the precise position of the slider.

 

[ << Back ]          

 
 
CopyRight © 2009 Anyi Instrument Co.,Ltd All Rights Reserved

XML ͼ | Sitemap ͼ