Home  |  About ANYI   |   Products   |   Service + Support   |   Testimonials   |   Expertise   |   Contact   |     
Standard Reference
Precision Step Gauges
Swivel Support
Module masters
Gauge blocks
Slide Calipers
Digital Calipers
Dial Calipers
Vernier calipers
Digital Scale Units
Depth Gauges
Digital Depth Gauges
Dial Depth Gauges
Vernier Depth Gauges
Height Gauges
Digital Height Gauges
Dial Height Gauges
Vernier Height Gauges
Micrometer Heads
Outside Micrometers
Inside Micrometers
Depth Micrometers
Thickness gauges
Special Calipers
Special Designs
Data Interfaces
Surface Plates
You are here: Home >> product >> Height Gauges

Product Show

Digital Height Gauge with Double Datum Surfaces
Inquire Now
Features :
Both the upside and the underside of the base are datum surfaces. The slider has two jaws on its left side and right side. The jaw on the slider's left is for the bottom measuring face. The jaw on the slider's right is for the upside measuring face. (When the base is on the inspection surface plate, the surface of the plate is regarded as the extension of bottom measuring face.)
In case the inspection surface plate is unavailable, the upside of the base can be used as an inspection surface plate.
Measurement can still be done with the slider's right jaw.
The range of application can be widened with some attachments.
  Specifications :
  Measuring Range Order No. Resolution Pernissible Error
  0-125mm 130-300 0.01mm ±0.03mm
  0-150mm 130-301 0.01mm ±0.03mm
  0-200mm 130-302 0.01mm ±0.03mm
  0-300mm 130-303 0.01mm ±0.04mm
  0-500mm 130-305 0.01mm ±0.05mm
  0-600mm 130-306 0.01mm ±0.06mm
<< back
CopyRight © 2009 Anyi Instrument Co.,Ltd All Rights Reserved

XML ͼ | Sitemap ͼ